Sharp XE-A113 Printing journal data on the way of a transaction, Sample print, Sample EJ report

EJ REPORT READING AND RESETTING

The cash register provides an electronic journal (EJ) function. This function is intended to record the journal data in a memory instead of journal paper, and print the data as an EJ report. The register records the journal

data in REG, PGM, , X1/Z1 and X2/Z2 modes. By default, a maximum of 3000 lines are stored in the memory. For details of EJ programming, please refer to “Other programming (Job code 68) on page 58 and (Job code 70) on page 60”.

Printing journal data on the way of a transaction

You can print journal data of a current transaction recorded in EJ memory by pressing the Rkey during the transaction.

This function is valid when the printing style is programmed to receipt, and the receipt ON/OFF function is set to OFF. For changing the setting, refer to “Additional Information for BASIC SALES ENTRY”.

•Sample print

EJ report title

EJ report end title

Reading and resetting the electronic journal data (Issuing EJ report)

You can read the journal data stored in the EJ memory in the journal format by executing the following procedure in the X1/Z1 or OP X/Z mode.

To read all of the data: • Sample EJ report

7:@ A

To reset all of the data:

7:P @ A

To read the last 10 records:

710 @ A

•By programming, you can also issue an EJ Z report without printing the journal data on it. Refer to “Other programming (Job code 70)” on page 60 for the programming.

•To stop reading or resetting the data, turn the mode switch to “MGR” position. The data will not be erased when resetting.

•On the EJ memory, a maximum of 3000 lines of data can be stored. When executing all data reading, all of the data stored in the EJ memory will be printed.

•When printing is performed continuously, the printing may be intermitted several seconds. After the intermission, the printing

70will be restarted.

Header information print