Siemens 6500 Series manual TCP/UDP Options Window

6500 Series Residential Gateway User’s Guide Configuring Advanced Features

TCP/UDP Options Window

The “TCP/UDP Options” window is displayed if you select TCP or UDP protocol from the “Protocol Definition” window. If you selected either of these protocol types, you must identify the source and destination ports.

1.Select one of the following options from the Source Port Operator drop-down menu and the Destination Port Operator drop-down menu:

•any

Any port is acceptable as the source/destination port.

•less than or equal to

A port less than or equal to the numeric value in the Port 1 field is acceptable as the source/destination port. Be sure to provide a value in the Port 1 field.

•equal to

A port equal to the numeric value in the Port 1 field is acceptable as the source/destination port. Be sure to provide a value in the Port 1 field.

•greater than or equal to

a port greater than or equal to the numeric value in the Port 1 field is acceptable as the source/destination port. Be sure to provide a value in the Port 1 field.

•range

Any port between the value of the entry in the Port 1 field and the value in the Port 2 field is acceptable as the source/destination port. Be sure to provide a value in the Port 1 and Port 2 fields.

2.Optionally, select Check TCP syn packets if you wish this rule to prevent the blocking of synchronization packets for pre-existing sessions.

3.Click Next.

4.Click Finish.

67