Configuration

zRecording by Alarm

Configure "Alarm input setting" first. Then select the recording format:

Record source: choose JPEG or MPEG4 format

Recording frame

Set the number of images to be recorded immediately after an alarm occurs. Images of the moment when an alarm occurs are not included.

1, 2, 5, 10, 30 and 60 frames can be selected if JPEG format selected. No need for MPEG4 format

Recording cycle

Set a time interval for alarm recording 1, 2, 5, 10, 30, 60, 90, 120 s can be selected for JPEG format, no need for MPEG4 format

Recording time:

If MPEG4 is selected, please set the recording time to 2, 5, or 10 s.

zRecording by Motion

Perform "Motion Detection Setting" first.

All the other settings are same as recording by alarm as above.

zRecording by Network Loss

Select network recording. After network loss, the network camera automatically stores images based on your settings.

Recording cycle

Set a time interval for network recording. 1, 25, 10, 30, 60, 90, 120 s can be selected.

2.Click the Save button under the items.

ÎChanges are saved.

NOTE

Setting the overwrite mode to ON deletes files, beginning with old files. If important data is to be saved, set the Overwrite mode to OFF.

 

41

 

 

Siemens Building Technologies

 

Fire Safety & Security Products

01.2009

Page 41
Image 41
Siemens CCMX1315-LP configurationmanual Configuration