Siemens CCMX1315-LP configurationmanual Motion detection settings

Configuration

7.4.3Motion detection settings

These settings are similar to the alarm input settings, with some additional functions:

zMotion detection

–Set to ON: open motion detection function.

–Default is off, close motion detection function.

zArea

–Click on “Set motion area”, and an image screen will pop up.

–Select the interested area by dragging the mouse.

zSensitivity

Set "Sensitivity."

–High: An alarm will be triggered with even small changes in brightness within the defined area.

–Mid: Intermediate between High and Low.

–Low: An alarm will be triggered with a major change in brightness within the defined area.

zText Enable

–Select ON or OFF to define whether an additional alarm text defined in the Text field is to be overlaid on the video image.

zText

–Define an individual text for alarm overlay.

zAudio Output

–Select ON or OFF to define whether an additional audio message (*.wav), pre-recorded on the SD card, is to be output via the Audio out connector.

zEvent

Pre-recorded voice files with extension .wav that have been uploaded to SD memory card in advance can be selected as voice alarm message. Max. 4 kinds of audio source can be selected.

	35
Siemens Building Technologies
Fire Safety & Security Products	01.2009