Siemens CCMX1315-LP configurationmanual System, Forbidden Protocol, Setting, Update

Configuration

7.9.3Forbidden Protocol

ICMP or UDP protocol can be rejected by firewall if assigned.

7.10System

7.10.1Setting

CGI-Lock is a system security setting. It means you can activate or deactivate the login data for the CGI-commands. If you set ON, you always have to enter an ID and password for the web-page, but besides you can change everything using the cgi-commands. Otherwise, it’s not necessary for the login data if you choose OFF.

7.10.2Update

You can update system firmware once the update file is available. It is the customer's responsibility to update firmware. All camera motions will shut down during firmware update. Close any other screens before starting a firmware update. Never disconnect power and LAN cable during the firmware update process. Rebooting the camera after firmware update may take approx. 15 minutes.

The power supply to the camera must not be interrupted during the SW update.

SIGNALWORT Otherwise the camera will be damaged and have to be returned to the workshop for repair.

.

	51
Siemens Building Technologies
Fire Safety & Security Products	01.2009