Configuration
7.4.4Alarm output
zAlarm mode:
The alarm output can be turned OFF or be activated when any of the following events occurs:
–B/W: when the camera changes to monochrome
–Event: Once alarm input1 or alarm input 2 or motion is triggered, the alarm out will be triggered immediately as well.
zOutput hold time:
Set a time to hold alarm output. Choose either 0, 5, 10, 15, or 30 seconds. This function is used when connecting to alarm output terminals and activating a siren, buzzer or emergency light.
7.4.5Audio Event
You can choose which audio *.wav file you want to upload as a voice alarm message to the SD card from your PC. There are 4 audio events available for upload. You can select in the appropriate menu which audio event is to be played with which event (Motion or Alarm input 1).
36
Siemens Building Technologies |
|
Fire Safety & Security Products | 01.2009 |
