69BrowserMenu
The connection to the WAP gate-
way is established as a data call via
an access point.You must enterthe
dial numberof this access point in
the »Profile setup« below.
Communication between the
access point and the gateway
takes place automatically when you
have entered the IP address of the
gateway as mentioned below.
It is likely that yournetwork oper-
atorhas already stored this infor-
mation in yourphone. If not, you
must select the “Profile setup”
menu and enterthe data yourself.
Displaysetup
Select whetheryou
want the title of the displayed card
to be shown in the first line of the
display ornot.
Profile setup
This is where you set
up yourWAP connection.You can
store up to 8 different profiles,each
with an individual setup.
• Add profile: Select this submenu
to add a new profile.Enter any of
the following parameters:
Note: The minimum numberof
parameters required are dial-up
numberand IP address.
• The name of the profile
• The supplied dial-up number
• The connection type (analog or
ISDN)
• The data speed (9600 or14440)
• The supplied username
• The supplied password
• The IP address (use the -
key fordecimal commas)
• The port number
• The name of yourHomepage for
this profile.(Like the start page
on yourPC).
• The idle time.Set the period (in
seconds) afterwhich you will be
disconnected afteryour last key-
stroke.
• View profiles: Select this sub-
menu to view any stored profiles.
Press »SELECT« to view the con-
tents of a specific profile.
By pressing »OPTION« you can
choose to edit ordelete the select-
ed profile.
Facts & Tips
• Contact yournetwork operator or
special WAP gateway providerforfur-
therinformation on how to set up the
WAP browser.
• Permission to view,add or change
the WAP profiles might be restricted
by yournetwork operator.
Setup menu
Message setup
68 Setup menu
First
Enterthe Setup menu
by pressing »MENU«
Select »Message setup«
Send SMS setup
(Continued)
Replypath
Formessages that
have to be sent to the recipient via
several service centres,some net-
works offerthe feature of forward-
ing a reply,if any, back to you
through the same chain of service
centres.This is called a reply path,
and activating it may speed up the
delivery time fora reply.
Contact yournetwork operator for
furtherinformation.
Confirmation
Select »Confir-
mation on« if you want a confirma-
tion from the network operator
when yourmessage has been sent
to the recipient.
If the message has not been sent
you will get the information that it
is eitherqueued or not delivered.
The period during which you can
receive this kind of confirmation
corresponds to the validity time
selected by you in the Message
setup menu.
Signature
You can add a signature
to be sent automatically at the end
of yourSMS messages.
Broadcast setup
To be able to receive broadcasts you
must enterBroadcast setup which
gives you the following options:
Activation
Select whetheryou
want the broadcast function to be
activated.
Channels
Set up a list covering the
kind of information you wish to
receive.The phone will show you
various options forstoring the indi-
vidual channels.
Pressing »EDIT« will give you a
range categories from which you
can select the one(s) you want to
receive.
Language
Some network opera-
tors offerbroadcast messages in
different languages.Select
between different languages or
simply select all languages.
Sorting
Specify whetheryour messages in
yourinbox, outbox or sent items
should be sorted by date and time,
by subject orby sender.
Facts & Tips
• Formore information on broadcasts,
see p.48.

User guide S40 US 19/09/01 15:44 Side 68