Sim2 Multimedia 3D-S manual Projector Keypad, Operation, Batteries

◦Memories

◦3D Controls (3D Mode and Input Formats)

Operation

The Lumis 3D-S projector has two IR receivers, one on the front and one on the back of the unit. The operative range of the remote control is approximately 10 m (33 ft.). Make sure that there is nothing obstructing the infrared beam between the remote control and the IR receiver you are pointing to. You can point the remote control to- wards the screen, as the IR beam is reflected by the screen towards front IR receiver of the projector. In this case the effective range of the remote control may be smaller than declared.

Batteries

To install batteries in the remote control:

1.Open the battery cover.

2.Insert four AAA (LR03) batteries making sure the polarities match the + marks inside the battery compartment.

3.Replace the cover.

Replace the batteries with new ones when the operating range of the remote control decreases. Dispose of used batteries according to local regulations. Make sure you do not mix old and new batteries or different types of batteries.

Warning: If you will not use the remote control for a long time, remove the batteries to avoid battery leakage.

Projector Keypad

	turns the projector on or off
◂ ▸ ▴ ▾
	select menu items, adjust settings or switch test patterns
MENU	enters OSD Main menu and selects the desired section
ESC	exits OSD
SOURCE/O	enters OSD Input menu/selects a menu item

2 Overview	Lumis 3D-S	10
	User Guide