Sim2 Multimedia 3D-S manual Connections, Inputs, Control, Service, Outputs, Overview, User Guide

Connections

❶ ❷ ❸ ❹ ❺ ❻

	❼	❽
Inputs	❶ HDMI 1	Accept both HDMI and DVI digital video inputs.
	HDMI 2
	❷ Components/RGB-HV	Four RCA connectors. They accept both standard
		and high-definition component (YPrPb) and
		RGB-HV signals. Also used as RGB input for SCART
		RGBS signals.
	❸ Video	One RCA connector. Accepts composite video sig-
		nals. Also used as composite sync input for SCART
		RGBS signals.
	❹ Graphics RGB	One D-Sub 15-pin female connector. Accepts
		component or RGB high-definition signals.
Control/	❺ USB	USB 1.1 (type B) port for serial commands and
Service		firmware upgrade.
	❻ RS-232	RS232 (female D-Sub 9-pin) port for serial
		commands and firmware upgrade.
Outputs	❼ TRIG 1	12 V 100 mA max output, for motorized screen
		control. Activates when the projector is switched
		on.
	TRIG 2	12 V 100 mA max output, for motorized screen
		masking systems control. See “Screen” on page
		27.
	TRIG 3	12 V 100 mA max output, for motorized ana-
		morphic lens position control. See “Anamorphic
		Lens” on page 27.
	❽ 3D Sync OUT	VESA DIN-3 connector for 3D IR Emitter cable.

2 Overview	Lumis 3D-S
	User Guide

11