Product disposal
The lamp inside this projector contains mercury and may be subject to special disposal or recycle regulations. Dispose or recycle in accordance with local laws. For more information contact the Electronic Industries Alliance at www.eiae.org or check www.lamprecycle.org
Notice
The appliance has been subjected to exhaustive operating tests by SIM2 to guarantee the highest quality. The projector bulb life should thus initially be around 30-60 hours. In addition to the customary checks, the Quality Control department also runs addi- tional statistical tests before shipment. In such cases, the packaging may show signs of having been opened, and the hours of lamp operation may prove to be higher than those normally shown when only standard tests are performed.
As the optical system of the Lumis 3D-S is extremely compact and has the purpose of developing very high brightness and contrast, it is possible that a small quantity of light is visible outside of the projection area and will vary depending on the type of lens used and the zoom and shift setup. This characteristic of the optical system is to be deemed as normal. In order to reduce this effect SIM2 recommends that the area surrounding the projection screen is as dark as possible.
The Lumis 3D-S is a three chip DLP projector and uses three high resolution DMD (red, green, blue). These three DMD are precisely aligned through a high precision process that reduces the alignment error to within the foreseen limits of tolerance. The max- imum limits of misalignment are the following:
•Screen Center: up to 0.7 pixels between each color
•Screen Borders: up to 2 pixels between each color
These limits are perfectly normal for this optical system and will not be considered as a malfunction of the product.
Note: One pixel corresponds to 10 thousandths of a millimeter on the DMD.
Important information | Lumis 3D-S | 6 |
| User Guide | |
| | |
