Important: When you enter the Memories menu, a copy of the current setting for the active input is saved in a temporary memory, numbered 0 and called Auto. After re- calling one or more memories for the current input, you will be able to revert to Auto settings at any time, provided that you do not exit Memory menu by pressing Esc.
Info
Displays a summary of the projector settings
This function is displayed by pressing Info on the remote control.
Quick Menus
The quick menus provide access to the main adjustments that affect image quality without opening the main menu. The adjustments Brightness, Contrast, Color, Tint, Sharpness, Filter and Noise Reduction will appear on after the other in the lower part of the screen by pressing ▴ or ▾.
Messages
The following messages may appear on your screen:
•No signal. The projector does not recognize any signal applied to the selected input. In this case:
◦make sure the selected input is connected to a video or graphic signal and that this source is functioning correctly.
◦check the condition of the cables used to connect the system to the vari- ous sources.
◦make sure the video or graphic signals supplied by the source are compat- ible with the system technical specifications and, in particular, with those of the selected input.
•Out of range. This message appears when either the resolution or the vertic- al/horizontal frequency of the input signal exceeds system specifications (for example a QXGA graphic signal).
4 Operation | Lumis | 34 |
| User Guide |
|
|
|
|
