Sim2 Multimedia 3D-S manual Ceiling Mounting, Orientation, Vertical Lens Shift

Ceiling Mounting

Invert the projector and suspend it from the ceiling using a specific bracket.

•To fit the bracket unscrew and remove the 3 rubber feet

•Attach bracket by using 3 x M6 screws not exceeding 15 mm in length

For ceiling mounting use only SIM2-approved ceiling brackets and adhere to the installation instructions and safety guidelines provided with the bracket. Do not over-tighten the screws.

Orientation

By default, the Lumis 3D-S is configured for a Front installation (projector installed up- right and in front of the screen). If the projector is installed behind the screen or inver- ted, you can use the image orientation function of the projector (see “Orientation” on page 29)

Vertical Lens Shift

Ideally, the projector should be positioned at a right angle to the screen and in such a way that:

•the lens center and screen center are aligned with each other

•the projected image fills the screen perfectly

3 Installation	Lumis 3D-S	14
	User Guide