Disabled functions for the active windows
The following OSD menu functions cannot work on the active windows for the PIP: My Screen, Auto Source Search.
Creating your own startup screen
In addition to selecting the projector preset startup screen from among SIM2 or Blue screen, you can make your own startup screen that is a picture projected from your computer or video source.
To create your own startup screen, project the picture you want to use as your startup screen from either a computer or video source. The rest steps are as follows.
•Using the OSD menu
1.Press MENU and then press 
/ 
until the System menu is highlighted.
System
2. | Press to highlight My Screen and press ENTER. A |
| My Screen |
| ENTER | ||
| confirmation message displays. |
| Floor Front |
|
| Disable | |
3. | Press ENTER again. |
| Disable |
| Blue | ||
|
| ||
4. | The message 'Screen Capturing...' displays while the |
| On |
| projector is processing the picture. Please wait. |
| |
|
|
| |
5. | If the action is successful, you see the message 'Captured | EXIT Back | |
|
|
Succeeded' on the screen. The captured picture is saved as
My Screen.
6.To view the captured picture displayed as the startup screen, set My Screen in the
System > Splash Screen menu and restart the projector.
In the unlikely event that the capturing action fails, change your target picture.
Personalizing the projector menu display
The
•Rename User Mode: See "Renaming user modes" on page 24 for details.
•Menu Display Time in the System > Menu Settings menu sets the length of time the OSD will remain active after your last key press. The time length ranges from 5 to 30 seconds in 
/ 
to select a suitable time.
•Menu Position in the System > Menu Settings menu sets the OSD position in five locations. Use 
/ 
to select a preferred position.
•Language in the System menu sets your familiar language for the
•Splash Screen in the System menu sets a preferred screen to be displayed during projector
Using the projector 33
