Sim2 Multimedia D60 user manual Indicators, When the projector is in a normal state

Indicators

There are three indicators which show the status of the projector. Check the following for information about the indicator lights. If there is anything wrong, turn the projector off and contact your dealer.

When the projector is in a normal state, ...

Lamp	Temp	Power	Status & Description
Red	Red	Red	Main power switch on
Off	Off	Orange	Stand-by mode
Off	Off	Green	Powering up
		Flashing
Off	Off	Green	Normal operation
			• The projector needs 90 seconds to cool down as it
		Orange	was abnormally shut down without the normal
Off	Off		cooling down process.
		Flashing	• The projector needs to cool for 90 seconds after the
			power is turned off.

When the projector is in an abnormal state, ...

Lamp	Temp	Power	Status & Description
Red	Off	Off	• The lamp has been damaged. Please contact your
			local customer center for purchasing a new lamp.
			• The lamp is not properly attached.
Red	Off	Orange	• The lamp has been damaged. Please contact your
			local customer center for purchasing a new lamp.
Off	Red	Off
Red	Red	Off	The fans are not working.
Green	Red	Off
Orange	Red	Off		The projector has shutdown
Red	Green	Off	Fan sensors error
				automatically. If you try to
Orange	Green	Off	Fans do not rotate during
				re-start the projector, it will
Red	Orange	Off	powering up.
				shutdown again. Please
Red	Red	Red
				contact your dealer for
Green	Red	Red
				assistance.
Orange	Red	Red	Thermal condition error
Red	Red	Green
Green	Red	Green
Orange	Red	Green
Red	Red	Orange	The internal temperature is too high.
Green	Red	Orange	• The intake ventilation or the exhaust ventilation is
			blocked.
Orange	Red	Orange	• The projector may be in a poorly ventilated location.
			• The ambient temperature may be too high.
Green	Orange	Off	The dust filter is seriously clogged with dust. The projector
			is going to shut down.

46 Additional information