Sim2 Multimedia D60 user manual Image menu, Color menu, Brilliant Color, Dynamic Black

Image menu

FUNCTION	DESCRIPTION
(default setting/value)
Picture Mode	Pre-defined picture modes are provided so you can optimize your
	projector picture set-up to suit your program type. See "Selecting a
(Cinema Mode)
	picture mode" on page 23 for details.
	Selects a picture mode that most suits your need for the picture
Load Settings From	quality and further fine-tune the picture based on the selections
	listed below. See "Setting the User 1/User 2/User 3 mode" on
	page 24 for details.
Brightness	Adjusts the brightness of the picture. See "Adjusting Brightness" on
(depends on the	page 25 for details.
selected input source)
Contrast	Adjusts the degree of difference between dark and light in the
(depends on the	picture. See "Adjusting Contrast" on page 25 for details.
selected input source)
Color	Adjusts the color saturation level -- the amount of each color in a
(depends on the	video picture. See "Adjusting Color" on page 25 for details.
selected input source)
Tint	Adjusts the red and green color tones of the picture. See
(depends on the	"Adjusting Tint" on page 25 for details.
selected input source)
Sharpness	Adjusts the picture to make it look sharper or softer. See "Adjusting
(depends on the	Sharpness" on page 25 for details.
selected input source)
Reset Picture Settings	Returns all settings in the Image and Color menus to the factory
	preset values. See "Resetting the picture mode" on page 24 for
	details.
Rename User Mode	Renames User 1, User 2, or User 3. See "Renaming user modes" on
	page 24 for details.

Color menu

FUNCTION	DESCRIPTION
(default setting / value)
Black Level	Sets the picture grayscale as 0 IRE or 7.5 IRE. See "Setting Black
(0 IRE)	Level" on page 26 for details.
Clarity Control	Adjusts the picture clarity. See "Controlling image clarity" on
	page 26 for details.
Color Temperature	There are several color temperature settings available. See
(depends on the	"Selecting a color temperature*" on page 26 for details.
selected Picture Mode)
Color Temperature	See "Setting a preferred color temperature" on page 27 for details.
User_ Fine Tuning
Gamma Selection	See "Selecting a Gamma setting" on page 28 for details.
(depends on the
selected Picture Mode)
Brilliant Color	See "Adjusting Brilliant Color" on page 28 for details.
(On)
Color Management	See "Color Management" on page 27 for details.
Dynamic Black	See "Adjusting contrast ratio via IRIS" on page 29 for details.
(On)

Using the projector 37