Sim2 Multimedia D60 user manual Setup menu, Information menu

	Menu Display Time (10 sec)
	Sets the length of time the OSD will remain active after your last key
Menu Settings	press. The range is from 5 to 30 seconds in 5-second increments.
	Menu Position (Center)
	Sets the On-Screen Display (OSD) menu position.
Input Source	Selects an input source to be projected. See "Selecting an input
	source" on page 18 for details.
	Sets whether the projector searches automatically for input
Auto Source Search	sources. If the source scan is Off, the projector will scan for input
(Off)	sources until it acquires a signal. If the function is not activated, the
	projector selects the last used input source.

Setup menu

FUNCTION	DESCRIPTION
(default setting / value)
	Lamp Power (Normal)
Lamp settings	Selects the projector lamp between Normal and Whisper modes.
	Lamp Hours
	Shows the lamp hours information. See "Getting to know the lamp
	hour" on page 43 for details.
	Grid
	Press ENTER to display the grid test pattern. It helps you adjust the
	image size and focus and check that the projected image is free of
Pattern	distortion.
	Color Bar
	Press ENTER to display the color bar test pattern. You can display this
	test pattern to check that the colors are to your liking.
	Dust Filter Hours
Dust Filter	Shows the dust filter hours information
	Reset Dust Filter Timer
	Resets the duster filter timer to '0'. See "To clean the filter" on
	page 42 for details.
High Altitude Mode	A mode for operation in areas like high altitude or high
	temperature. See "Operating in a high altitude environment" on
(Off)
	page 31 for details.
	Password (Off)
	Limits use of the projector to only those who know the correct
	password. See "Utilizing the password function" on page 20 for
Password	details.
	Change Password
	You will be asked to enter the current password before changing to
	a new one. See "Utilizing the password function" on page 20 for
	details.
	Returns all settings to the factory preset values.
Reset All Settings	The following settings will still remain: the selected input source, the
	position of lens shift, names of user modes, Keystone, Phase, Language,
	Projector Position, Reset Dust Filter Timer, High Altitude Mode, and
	Password.

Information menu

This menu shows you the current operating status of the projector.

Using the projector 39