h1000 pilot |
| description/installation |
| ||
|
|
|
Any
1.Locate the cable from the speed sensor to the instrument input.
2.Cut cable (if necessary) and insert a junction box (B&G part no.
3.Use a length of
4.Calibrate the speed input in accordance with the instructions given in the Speed Calibration section of the h1000 System User manual.
Non B&G Display
Non B&G
Paddle Unit
ACP Boat Speed | Function | Cable |
Terminals |
| |
Green | Speed signal input | Red wire |
Red | Not used | Not used |
Black | Ground | Blue wire |
Silver | Screen | Screen |
Page 43