Simrad H1000 manual Splitting the ram drive unit, Type 0, type 1 and type 2 units, Type 3 units

description/installation	h1000 pilot
splitting the ram drive unit

Note: when dealing with any hydraulic system great care must be taken to ensure that a high degree of cleanliness is observed and no dirt, moisture or foreign objects are allowed to enter the system. When filling or topping up the external reservoir only use a good quality ISO 10 hydraulic oil e.g., Q8 Dynobear 10 (10cSt at 400C).

It is not possible to split the following linear drives:

ξ RAM-T0-12V ξ RAM-T1-12V ξ RAM-T2-12V ξ RAM-T2-24V

type 0, type 1 and type 2 units

Comprise a combined ram/pump, reservoir and hydraulic cylinder. These units cannot be split.

type 3 units

Are supplied as split units, connected by 1m (3ft) hoses. These can be supplied with quick connect couplings and pre-filled hoses. These units do not need to be bled.

Note: types 3 units with longer hoses are available from your dealer.

Page 24