SmartBridges sB3410 manual AirClient Router/NAT to airClient Bridge

i n t e l l i g e n t w i r e l e s s p l a t f o r m

2.6.airClient Router/NAT to airClient Bridge

Follow the steps below to change airClient Router/NAT mode to airClient Bridge Mode

1.Go to ‘Tools System Configuration’ drop down menu. The ‘System Configuration’ will be displayed.

2.Click on the ‘Current Operational Mode’ link to go to the ‘System Configuration’ page. Choose ‘Bridge under the ‘Remote Device’ option.

3.Click on ‘Apply Changes’. A confirmation pop-up window will be displayed.

4.Enter the fields for ‘IP Address’, ‘IP Mask’ and Gateway for ‘Ethernet Configuration’.

5.Enter the MAC address and the SSID of the remote radio.

6.Enter the Channel and Domain.

7.Click on the ’Apply Changes’ button to change the settings.

8.The device will be rebooted and set to the chosen operational mode.

Figure 2-8 Changing airClient Router/NAT to airClient Bridge

airClient™ Nexus User Guide Page 20 of 66