SmartBridges sB3410 manual AirClient Bridge to airClient Router/NAT

i n t e l l i g e n t w i r e l e s s p l a t f o r m

2.5. airClient Bridge to airClient Router/NAT

Follow the steps below to change airClient Bridge mode to airClient Router/NAT mode

1.Go to ‘Tools System Configuration’ drop down menu. The ‘System Configuration’ will be displayed.

2.Click on the ‘Current Operational Mode’ link to go to the ‘System Configuration’ page. Choose ‘Router’ (or NAT) under the ‘Remote Device’ option.

3.Click on ‘Apply Changes’. A confirmation pop-up window will be displayed.

4.Enter the fields for ‘IP Address’, ‘IP Mask’ and ‘Gateway’ for ‘Ethernet Configuration’ and ‘Wireless Configuration’.

5.Enter the SSID and the Domain of a remote radio.

6.Click on ’Apply Changes’ button to change the settings. The device will be rebooted and set to the chosen operational mode.

Figure 2-7 Changing airClient Bridge to airClient Router/NAT

airClient™ Nexus User Guide Page 19 of 66