SMC Networks SMC7404BRA EU Installing a Splitterless Connection, 2. Installing Without a Splitter

CONNECT THE SYSTEM

Installing a Splitterless Connection

If you are using a splitterless (G.lite) connection, then your service provider will attach the outside ADSL line directly to your phone system. In this case you can connect your phones and computer directly to the incoming ADSL line, but you will have to add low-pass filters to your phones as shown below:

Plain Old

Telephone

System (POTS)

Residential

Connection

Point (NID)

Voice

Voice	Filter
& Data

Voice

& Data

Data

ADSL Router

or

Ethernet

hub or switch

Figure 2-2. Installing Without a Splitter

Attach to Your Network Using Ethernet Cabling

The four LAN ports on the Barricade auto-negotiate the connection speed to 10 Mbps Ethernet or 100 Mbps Fast Ethernet, as well as the transmission mode to half-duplex or full-duplex.

Use twisted-pair cabling to connect any of the four LAN ports on the Barricade to an Ethernet adapter on your PC. Otherwise, cascade any of the LAN ports on the Barricade to an Ethernet hub or switch, and then connect your PC or other network equipment to the hub or switch. When

2-7