Troubleshooting Chart
Symptom | Action |
|
|
Management Problems | |
|
|
Cannot connect | • Be sure to have configured the Barricade with a |
using the Web | valid IP address, subnet mask, and default |
browser | gateway. |
| • Check that you have a valid network connection |
| to the Barricade and that the port you are using |
| has not been disabled. |
| • Check the network cabling between the |
| management station and the Barricade. |
|
|
Forgot or lost | • Press the Reset button on the rear panel (holding |
the password | it down for at least five seconds) to restore the |
| factory defaults. |
|
|
