Configure PCs to use SnapGear appliance Internet gateway
The PCs on your network must be configured to use the SnapGear appliance as the default gateway for Internet access. See the section called Configuring the PCs on your network for more information.
Establishing the connection
If you are connecting to your ISP using a modem or ISDN connection, the SnapGear appliance will automatically place a call when an application requires access to the Internet (e.g. sending
To establish the connection:
1.From any PC on the network, launch a browser application (e.g. Internet Explorer or Netscape Navigator).
2.The SnapGear appliance will dial the ISP and log in. On the front panel, the COM LED will flash when establishing the connection.
3.The ONLINE LED will light when the Internet link is created and your browser will display the default home page.
4.If
Internet access is automatic if you are using a permanent connection device (e.g. cable modem) or if you are using ADSL or an analog modem configured to stay connected.
37
Connecting to the Internet
