Account list
As new dial-in user accounts are added, they are displayed on the updated Account List. To modify a password for an existing account, select the account in the Account List and enter the new password in the New Password and Confirm fields. Click Apply under the Delete or Change Password for the Selected Account heading, or click Reset if you make a mistake.
To delete an existing account, select the account in the Account List and check Delete under the Delete or Change Password for the Selected Account heading. If changes to the user account are successful, the change is shown on the Dial-in Setup screen . If the change is unsuccessful, an error is reported as shown in the following figure:
Figure 4.4 Dial-in password error
When you have finished adding and modifying user account details, you can configure other SnapGear appliance functions by selecting the appropriate item from the Network or System menus. You can also apply packet filtering to the dial-in service as detailed in Chapter 6, Firewall.
Warning
If you have enabled a SnapGear appliance COM port for dial-in, this port cannot be used simultaneously for dial-out activities (e.g. dial-on-demand Internet connection). If a port is set-up for Internet access, and is later enabled for dial-in, the Internet access function is automatically disabled.
44
Dial-in server configuration
