SnapGear 1.7.8 manual Installing and configuring your SnapGear appliance, Step Chapter

Installing and configuring your SnapGear appliance

This manual contains instructions for installing and configuring your SnapGear appliance on your network. The basic steps and related chapters are:

Step		Chapter
1.	Interconnect the SnapGear appliance	Chapter 2, Getting started
and PCs on a local area network.
2.	Connect the telecommunications	Chapter 3, Connecting to the Internet
hardware/modem for dial-in/dial-out
Internet access.
3.	Set up the network IP addresses and	Chapter 2, Getting started
firewall.
4.	Set up Internet hardware and Internet	Chapter 3, Connecting to the Internet
account and connect to the Internet.
5.	Set up users’ security dial-in/dial-out	Chapter 4, Dial-in server configuration
VPN.		Chapter 6, Firewall
		Chapter 7, Virtual Private Networking

5

Introduction