English
3366
Program settings
In the "Program Settings" setting mode you can adjust the application program for your scale to your
specific requirements - for operation as a bed scale this is always "Weighing and Taring".
Calling up Setting mode
First press the Print key and then simultaneously the F key.
Editing fixed tare values
In setting mode, you will find the fixed tare values via the program settings →General →Fixed tare
values.
Selecting an existing fixed value from the list
Browse with the Tare and F keys, and then call up the required fixed value with the Print key.
Editing an existing fixed value from the list
Mark the "Designation" parameter for the called up fixed value.
Open the input box using the Print key. Use the alphanumeric keypad to input data.
Press the Print key to accept the input. (Press the 0 key to cancel without accepting the input.)
The tare value parameter is marked.
Open the input box using the Print key. Use the alphanumeric keypad to input data.
Press the Print key to accept. (Press the Zeroing key to cancel without accepting the input.)
Clearing an existing fixed value
Browse with the Tare and F keys. Clear the displayed fixed value with the C key.
The gap in the consecutive number scheme is closed.
Inputting and saving a new fixed value
Press the ORG key; a new fixed value memory is created.
The memory location number is assigned by the appliance. The first figure in brackets indicates the
number of free memory locations, and the second figure indicates the memory locations assigned with
fixed tare values.
The "Designation" parameter is marked.
Open the input box using the Print key. Use the alphanumeric keypad to input data.
Press the Print key to accept the input. (Press the 0 key to cancel without accepting the input.)
The tare value parameter is marked.
Open the input box using the Print key.
Use the alphanumeric keypad to input data.
Press the Print key to accept. (Press the Zeroing key to cancel without accepting the input.)
Exiting the fixed value list
Exit the list with the Zeroing key.
Clearing all fixed tare values
Press the Print key and use the Tare key to scroll to "execute". Confirm with the Print key to clear all
fixed tare values.