English
3388
Function mode
The "F" function key is available for calling up functions.
This assumes different functions depending upon how it is assigned.
The current function is selected in setting mode.
Setting mode is obtained by first pressing the Print key and then simultaneously the F key.
To establish the assignment options for the F key, in setting mode, go to Program Settings '
Weighing + Taring →F key.
Use the F key or Tare key to select the required function and confirm with the Print key.
The following functions are available:
Provisional tare
Dialysis function
Hold mode
Second unit
BMI function
Exit setting mode by pressing the ORG key.
Organisation data
Designation ORG A Input designation of organisation data memory A
Type digits or plaintext into keypad, e.g. "Article no.", max. 12 characters
Designation ORG B Input designation of organisation data memory B
Type digits or plaintext into keypad, max. 12 characters.
Designation ORG C Input designation of organisation data memory C
Type digits or plaintext into keypad, max. 12 characters.
Designation ORG D Input designation of organisation data memory D
Type digits or plaintext into keypad, max. 12 characters.
User password
Create / change Input password with up to 8 characters via keypad
After activating, the setting mode is only accessed by entering a password.
If you have forgotten your password, press CLEAR to release access.
CLEAR Clears the password and releases access
Reset terminal
Selection do not execute / execute
"Execute" clears all user-defined settings for the terminal and resets to
the factory setting.