SonicWALL 3500, NSA 5000, 4500 manual Configuring Address Objects

Configuring Address Objects

The Network > Address Objects page allows you to create and manage your Address Objects. You can view Address Objects in the following ways using the View Style menu:

•All Address Objects - displays all configured Address Objects.

•Custom Address Objects - displays Address Objects with custom properties.

•Default Address Objects - displays Address Objects configured by default on the SonicWALL security appliance.

To add an Address Object:

1.Navigate to the Network > Address Objects page.

2.Below the Address Objects table, click Add.

3.In the Add Address Object dialog box, enter a name for the Address Object in the Name field.

4.Select the zone to assign to the Address Object from the Zone Assignment drop-down list.

5.Select Host, Range, Network, MAC, or FQDN from the Type menu.

-If you selected Host, enter the IP address in the IP Address field.

-If you selected Range, enter the starting and ending IP addresses in the Starting IP Address and Ending IP Address fields.

-If you selected Network, enter the network IP address and netmask in the Network and Netmask fields.

-If you selected MAC, enter the MAC address and netmask in the Network and MAC Address field.

-If you selected FQDN, enter the domain name for the individual site or range of sites (with a wildcard) in the FQDN field.

6.Click OK.

Page 42 Creating a NAT Policy