About Handling Discs
How to Protect Disc Data
•Do not drop the disc cartridge or subject it to any violent shocks or vibrations.
•Do not disassemble the disc cartridge. It is a precision component that was carefully adjusted prior to shipment.
•Do not open the disc cartridge shutter manually or touch the disc inside. The shutter is designed to open automatically when the disc cartridge is inserted into the devices.
•Do not use the disc cartridge under high humidity and/or wide temperature fluctuation ambient conditions. Condensation may make it impossible to read or write data.
•Store the disc cartridge in its hard case.
•Do not expose the disc cartridge to direct sunlight or excessive heat, such as on the dashboard or glove compartment of an automobile.
•Do not store the disc cartridge under the following conditions:
-Location exposed to excessive dust and/or debris.
-Location exposed to direct sunlight.
-Near heat sources.
-Location subject to high humidity.
Write-protect switch
Data cartridges are equipped with a
Slide the switch in the direction of the arrow as illustrated below. A red surface appears in place of the switch to indicate that the cartridge is
Refer to the description of the disc.
Cleaning discs
The disc cartridge is designed to guard against dust and other airborne containments. Therefore there is no need to clean the discs. Using a disc cleaning device may damage the surface of the disc.
What to do when a disc is locked
To avoid locking the disc, do not insert it into the unit when the unit is off. If the disc is locked, turn on the unit, confirm that the disc is completely loaded into the unit, and then eject the disc by issuing the EJECT command or pressing the eject button.
Started Getting 2 Chapter
About Handling Discs 25