System Configuration

Introduction 1 Chapter

BW-RS101 System Configuration

The BW-RS101 is connected to a host computer through its SCSI interface. A maximum of fifteen peripheral devices can be connected in a daisy chain on the SCSI bus. See “SCSI Cables” on page 13 for details.

Host computer

SCSI cable 12 m

ID=0

ID=1

ID=2

ID=3

ID=4

ID=14

ID=15

 

 

 

 

 

ID=5

 

BW-RS101

 

SCSI peripheral devices

 

 

Note

The BW-RS101 supports single-ended (SE) and low-voltage differential (LVD) SCSI configurations. When a single daisy chain is both of the LVD and SE configuration, the transfer rate conforms to SE specifications.

BW-RU101 System Configuration

The BW-RU101 is connected to a host computer through its USB interface. A maximum of 127 peripheral devices can be connected to a host computer through USB Hub. See “USB Cables” on page 14 for details.

Note

The BW-RU101 complies with Hi-Speed USB (USB 2.0), which also complies to USB 1.1. Although with Hi-Speed USB the maximum transfer rate is 480 Mbps, with USB 1.1 the transfer rate conforms to the USB 1.1 specification of a maximum 12 Mbps.

6 System Configuration