Ventilation

Care should be exercised to prevent the internal mechanisms of the unit from overheating. Be careful not to clog or block the vent, or place the unit in an area with poor ventilation. The unit may stop operating altogether if the internal temperature becomes too high.

Moving the unit

Be sure to remove the disc cartridge when the unit is not being used. Also never move or transport the unit with the disc cartridge still inserted.

While in operation, the disc rotates at a high speed. Moving the unit at such a time may disturb the spinning disc and cause it to be damaged. Always remove the disc cartridge before moving your unit.

Condensation

Avoid subjecting the unit to extremes in temperature. If, for example, the unit is moved suddenly from a very cold location to a warm one, moisture from condensation may form within the unit due to the quick rise in ambient temperature. If a sudden change in the temperature cannot be avoided, wait for an hour or more before using the unit. Inserting a disc cartridge into the mechanism when moisture is present may cause damage to both the disc and the unit. Remove the disc cartridge immediately if you suspect any condensation problems. The moisture should evaporate quickly if the unit is left on without a disc inserted.

Temperature Alarm

When the temperature in the unit exceeds the preset level, the BUSY indicator starts flashing on and off at about 2-seconds intervals, regardless of whether or not a disc is being accessed, and the unit stops operating. If this happens, you should improve the ventilation of a setting area.

If the unit still refuses to operate, unplug the unit and contact your dealer.

Cleaning the Unit

Do not use a lens cleaning devices.

The internal lens cleaning brush mechanism ensures periodic, automatic cleaning of the pickup lens. Therefore thee is no need to clean the lens of the unit. Using a lens cleaning devices may damage the lens.

Make sure cleaning products are not used to clean a disc or the lens of the unit.

Maintenance

Clean the cabinet with a dry soft cloth, or with a soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish.

If problems occur

If any problems occur, turn off the power and unplug the unit, contact your dealer.

Precautions Usage 3 Chapter

Unit Usage Precautions

27