Part Location and Function

This section describes the parts of the “Professional Disc for DATA” units BW-

RS101 and BW-RU101 and gives an overview of their functions.

BW-RS101/BW-RU101 Front Panel

Introduction 1 Chapter

1

2

3

4

5

APower indicator

Lights green when the unit is on.

BSlot cover

When inserting a disc, open this slot cover by pulling it toward you. After inserting the disc, close the slot cover. The cover opens automatically when you eject a disc, but you need to close it manually. see “Inserting a Disc” on page 20 for details.

CBusy indicator

Alternates between green and amber when the unit is reading or writing data. Do not eject the disc when the indicator is amber.

DEmergency eject hole cover

In emergency only, remove this hole cover and then eject the disc. See “What to

Do when You Cannot Eject a Disc” on page 24 for details.

EEject button

Press this button to eject a disc from the unit. You cannot use the eject button to eject button to eject the disc when the unit is off.

Note

If write cache is used, pressing the eject button writes data in the cache memory to the disc, and so it may take a while to eject the disc.

Part Location and Function

7