BW-RS101 Rear Panel

Introduction 1 Chapter

1

2

3

4 5 6

AFunction switches

Use these switches to set the SCSI ID and unit functions. See “BW-RS101 Function Settings” on page 15 for details

BSCSI connectors

Connect SCSI cables (sold separately) to these connectors to link the host computer and/or other SCSI devices.

CAir duct

Air is sucked through the duct for cooling the unit.

Note

Make sure that you do not block the air duct or impede the air flow.

DF.GND (ground terminal)

Connect the ground terminals of other devices to the unit's frame ground.

EAC IN connector

Connect the supplied AC power cord to this connector.

FPower switch

Pressing the “ ? ” side turns on the power. To turn off the power, press the “a” side.

8 Part Location and Function