10
CCD-TR403_3-858-957-12.E/S

Basic Operations

Camera Recording
Make sure that a power source and a cassette is
inserted.
When you use the camcorder for the first time,
power on it and reset the date and time to your
time (p. 34) before you start recording. When you
reset the date and time, the date is automatically
recorded for 10 seconds after you start recording
(AUTO DATE feature). This feature works only
once a day.
Before you record one-time events, you may
want to make a trial recording to make sure that
you are using the camcorder correctly.
(1)While pressing the small green button on the
POWER switch, slide it to CAMERA.
(2)Slide START/STOP MODE to .
(3)Turn STANDBY up. The “STBY” indicator
appears in the viewfinder.
(4)Press START/STOP (red button). The
camcorder starts recording and the “STBY”
indicator changes to the “REC” indicator.
You can also select Recording mode, SP
(standard play) mode or LP (long play) mode. Set
REC MODE (p. 30) according to the length of
your planned recording before you start.

Operaciones básicas

Videofilmación
Asegúrese de que haya una fuente de
alimentación conectada y un videocassette
insertado.
Cuando utilice la videocámara por primera vez,
conecte la alimentación y reajuste la fecha y la
hora actual (pág. 34). Cuando las reajuste, la
fecha se grabará automáticamente durante 10
segundos a partir del inicio de la videofilmación
[función AUTO DATE (grabación automática
de la fecha)]. Esta función sólo trabajará una vez
al día.
Antes de realizar videofilmaciones irrepetibles,
se recomienda realizar una videofilmación de
prueba a fin de comprobar si la videocámara
funciona correctamente.
(1)Manteniendo presionado el pequeño botón
verde del selector POWER, deslice éste hasta
CAMERA.
(2)Deslice START/STOP MODE hasta .
(3)Gire STANDBY hacia arriba. En el visor
aparecerá el indicador “STBY”.
(4)Presione START/STOP (tecla roja). La
videocámara comenzará a grabar y el
indicador “STBY” cambiará a “REC”.
Usted también podrá seleccionar el modo de
grabación, modo SP (reproducción normal) o LP
(reproducción larga). Ajuste REC MODE (pág.
30) de acuerdo con la duración de la
videofilmación planeada antes de comenzar.