Trouble check

Others

Symptom

Cause and/or Corrective Actions

The supplied Remote Commander

• COMMANDER is set to OFF in the menu system.

does not work.

mSet it to ON. (p. 34)

•Something is blocking the infrared rays. mRemove the obstacle.

•The batteries are not inserted with the correct polarity. mInsert the batteries with the correct polarity. (p. 131)

•The batteries are dead.

mInsert new ones. (p. 131)

The picture from a TV or VCR does not appear even when the camcorder is connected to outputs on the TV or VCR.

•DISPLAY is set to V-OUT/LCD in the menu system. mSet it to LCD. (p. 34)

The beep sounds for 5 seconds.

• Moisture condensation has occurred.

mRemove the cassette and leave the camcorder for at least 1 hour. (p. 106)

•Some troubles occur in your camcorder.

mRemove the cassette and insert it again, then operate the camcorder.

Bubbles appear inside the lens.

•When you use the camcorder where the air pressure is low such as on a mountain or in an airplane, you may find bubbles inside the lens. This is not a malfunction. Bubbles will usualy disappear after about a week. But, how long it takes depends on the air pressure and use.

There is dust in the viewfinder. • Detach the eyecup and clean the viewfinder lens. (p. 108)

116