To set up a connection with a DUALSHOCK™3 wireless controller
1Make sure the Bluetooth® function on your device is turned on.
2 Connect a USB
3 Connect the DUALSHOCK™3 wireless controller to the OTG adaptor using a USB cable
4 When Controller connected(wired) appears in the status bar at the top of your device screen, unplug the USB cable.
5 When Controller connected(wireless) appears in the status bar, a wireless connection is established.
NFC
Use Near Field Communications (NFC) to share data with other devices, such as a video, photo, web page address, music file or contact. You can also use NFC to scan tags that give you more information about a product or service as well as tags that activate certain functions on your device.
NFC is a wireless technology with a maximum range of one centimetre, so the devices sharing data must be held close to each other. Before you can use NFC, you must first turn on the NFC function, and the screen of your device must be active.
NFC may not be available in all countries and/or regions.
To turn on the NFC function
1 From your Home screen, tap .
2Find and tap Settings > More….
3 Mark the NFC checkbox.
To share a contact with another device using NFC
1Make sure that both devices have the NFC function turned on, and that both
screens are active.
2To view contacts, go to your Home screen, tap 
, then tap 
.
3 Tap the contact that you want to share.
4 Hold your device and the receiving device back to back so that the NFC detection areas of each device touch each other. When the devices connect, a thumbnail of the contact appears.
5 Tap the thumbnail to start the transfer.
6 When the transfer is done, the contact information is displayed on the screen of the receiving device and is also saved on the receiving device.
To share a music file with another device using NFC
1Make sure that both your device and the receiving device have the NFC function turned on, and that both screens are active.
2To open the Walkman® application, tap , then find and tap .
3Select a music category and browse to the track you want to share.
4Tap the track to play it. You can then tap to pause the track. The transfer
works whether the track is playing or paused.
5Hold your device and the receiving device back to back so that the NFC
detection areas of each device touch each other. When the devices connect, a thumbnail of the track appears.
6Tap the thumbnail to start the transfer.
7When the transfer is done, the music file plays immediately on the receiving device. At the same time, the file is saved on the receiving device.
93
This is an Internet version of this publication. © Print only for private use.
