Symptom | Cause and/or Corrective Actions |
|
|
Digital program editing on the tape | cSet the input selector on the VCR correctly, then check the connection |
does not function. | between your camcorder and the VCR. (p. 86) |
| cWhen your camcorder is connected to a DV device that is not a Sony |
| product via an i.LINK cable, select [IR] in step11 of “Step 1: Preparing |
| |
| cAdjust the synchronization of the VCR. (p. 93) |
| cEnter a correct [IR SETUP] code. (p. 93) |
| cSelect the mode used to cancel recording pause again. (p. 92) |
| cSet your camcorder and the VCR more than 30 cm (12 in.) apart. (p. 92) |
| • The program may not be set to a blank section on the tape. |
|
|
The VCR is not responding properly | • While connecting via an i.LINK cable, select [IR] in step 11 of “Step 1: |
during Digital program editing when | |
it is connected via an i.LINK cable. |
|
|
|
Digital program editing on the | • The program may not be set to a blank section on the tape. |
“Memory Stick” does not function | • You cannot record or a distorted picture may be recorded if the tape has |
correctly. | been used repeatedly for recording. |
|
|
110Troubleshooting