4 Select (PICT. APPLI.), then [PB

ZOOM] by touching / and .

Tape playback zoom screen

“Memory Stick” playback select button

Memory playback zoom screen

Tape playback select button

5 Play back the still picture or movie, and touch the screen at the point you want to magnify within the displayed frame.

The picture is magnified approximately twice the original size and centered at the point you touched on the screen. When you touch another place, the point you touched becomes the center.

6 Adjust the zoom ratio using the power zoom lever.

You can select the zoom ratio from approximately 1.1 to 5 times the original size. Touch W to decrease, or T to increase the ratio.

To cancel the operation

Touch [END].

bNote

•You cannot magnify externally input pictures. Also,

you cannot output the magnified pictures via the DV Interface.

zTips

•You can save the enlarged picture as a still image on a “Memory Stick,” by pressing PHOTO. The image will be recorded at an image size of 640 × 480.

•If you press DISPLAY/BATT INFO during the playback zoom operation, the frame will disappear.

Displaying the screen indicators

You can choose to display the time code, tape counter, and other information on the screen.

Press DISPLAY/BATT INFO.

The indicators appear/disappear as you press the button.

zTip

• You can display the screen indicators during

 

 

playback on a TV. Select the

 

(STANDARD

 

 

 

 

Playback

SET) menu, [DISPLAY], then [V-OUT/PANEL]

 

(p. 81).

 

 

 

Displaying the date/time and camera settings data – Data code

During playback, you can view the date/time data and the camera settings data ([CAMERA DATA]) that are automatically recorded while recording pictures on a tape or a “Memory Stick.”

1 Slide the POWER switch repeatedly to select the PLAY/EDIT mode.

2 Touch during playback or playback pause.

,continued

Playback 51