Locating a scene on a tape for playback 
Searching quickly for a desired scene – Zero set memory
m REW
PLAY
STOP
DISPLAY
ZERO SET MEMORY
1 During playback, press ZERO SET MEMORY on the Remote Commander at the point you want to locate later on.
The tape counter is reset to “0:00:00” and 
appears on the screen.
If the tape counter is not displayed, press DISPLAY on the Remote Commander.
2 Press 
(stop) when you want to stop playback.
3 Press m REW.
The tape stops automatically when the tape counter reaches “0:00:00.”
4 Press PLAY.
The playback starts from the point designated “0:00:00” on the tape counter.
To cancel the operation
Press ZERO SET MEMORY on the Remote Commander again.
bNotes
•There may be a discrepancy of several seconds between the time code and the tape counter.
•Zero set memory will not function correctly if there is a blank section between recorded sections on the tape.
Searching for a scene using Cassette Memory – Title search
You can locate a scene where you have added a title (p. 74).
SEARCH M.
. / >
STOP
1 Slide the POWER switch repeatedly to select the PLAY/EDIT mode.
2 Press SEARCH M. on the Remote Commander repeatedly to select [TITLE SEARCH].
54Playback