The starting point of the first program is set, and the upper part of the program mark changes to light blue.
[IMAGE SIZE] appears when recording on a “Memory Stick.”
9 Search for the end of the first scene that you want to record on your camcorder, then pause playback.
You can adjust the position with / (frame).
10Touch [MARK OUT].
The ending point of the first program is set, and the lower part of the program mark changes to light blue.
11Repeat steps 7 to 10 and create programs.
12Set your VCR to recording pause.
Skip this step if you are connected via an i.LINK cable or recording on a “Memory Stick.”
13Touch [START].
14Touch [EXEC].
A search for the beginning of the first program starts, then the recording starts. [SEARCH] appears during the search and [EDITING] appears during editing.
When a program is recorded, the program mark changes from orange to light blue. When all programs have been recorded, the program editing operation stops automatically.
To cancel recording, touch [CANCEL].
To end Digital program editing
Touch [END].
To save a program without using it to record
Touch [END] in step 13.
The program is stored in memory until the cassette is ejected.
To erase programs
1Follow steps 1 to 6 in “Recording the selected scenes as programs” (p. 95), then touch [UNDO].
2Touch [DEL 1MARK] to delete the last set program. Or, touch [ALL ERASE] to delete all the programs.
3Touch [EXEC].
The programs are deleted.
To cancel this operation, touch [CANCEL].
bNotes
•You cannot set starting point or ending point on a blank section of the tape. If there is a blank section, the total time may not appear correctly.
•When you cannot operate the device correctly using an i.LINK cable connection, select [IR] in step 11 on p. 92, and set the [IR SETUP] code.
96Dubbing/Editing