Playing the picture on a TV
Connect your camcorder to a TV using the supplied A/V connecting cable as shown in the following illustration.
Connect the supplied AC Adaptor to the wall socket for the power supply (p. 13).
Refer also to the instruction manuals supplied with the devices to be connected.
To copy to another tape, see page 87.
A/V jack
When you have an S video jack on your TV or VCR *2
S video plug (black)
Yellow
White
Red
A/V connecting cable (supplied)*1
Playback
Signal flow
VCRs or TVs
*1 The supplied A/V connecting cable has a video plug and an S video plug for the video connection.
*2 This connection produces higher quality DV format pictures. When there is an S video jack on the device to be connected, connect the S video plug to that jack instead of using the yellow video plug. The audio will not be output when you connect with the S video plug alone.
When your TV is connected to a VCR
Connect your camcorder to the LINE IN input on the VCR using the A/V connecting cable. Set the input selector on the VCR to LINE.
When your TV is monaural (When your TV has only one audio input jack)
Connect the yellow plug of the A/V connecting cable to the video input jack and connect the white or the red plug to the audio input jack of your TV or VCR.
When you want to play the sound in monaural mode, use a connecting cable (optional) for that purpose.
If your TV/VCR has a
(EUROCONNECTOR)
Use the
camcorder (For models with the 
mark printed on their bottom surfaces only). This adaptor is designed for output use only.
TV/VCR
Playback 53