you have recorded afterwards is not output from the | 9 Touch [AUDIO DUB]. |
speaker. Check the sound by using the headphones | |
or a TV. | A green X mark appears on the LCD |
| |
| screen. |
Recording sound
1 Insert a recorded cassette into your camcorder.
2 Slide the POWER switch repeatedly to select the PLAY/EDIT mode.
3 Touch (play/pause) to play the tape.
4 Touch (play/pause) again at the point where you want to start recording the sound.
The playback pauses.
5 Touch .
6 Touch [MENU].
7 Touch / to select (EDIT/
PLAY), then touch .
8 Touch / to select [AUD DUB
CTRL], then touch .
10Touch (play/pause) and start playing back the audio you want to record at the same time.
A red mark remains on the LCD screen while recording sound.
The new sound is recorded in stereo 2 (ST2) during the playback of the tape.
11Touch (stop) when you want to stop recording.
To dub on other scenes, repeat steps 3 and 4 to select scenes, then touch [AUDIO DUB].
12Touch , then .
To set the end point for audio dubbing
During playback, press ZERO SET MEMORY on the Remote Commander at the scene at which you want to stop audio dubbing. Then, perform steps 4 to 10. The recording stops automatically at the selected scene.
bNote
•You can only record additional audio over a tape recorded on your camcorder. The sound may deteriorate when you dub audio on a tape recorded on other camcorders (including other
98Dubbing/Editing