Step 2: Charging the battery pack
You can charge the battery by attaching the
“InfoLITHIUM” battery pack (M series)
to your camcorder.
bNotes
•You cannot use batteries other than the “InfoLITHIUM” battery pack (M series) (p. 119).
•Do not
•Use a nearby wall socket when using the AC Adaptor. Disconnect the AC Adaptor from the wall socket immediately if any malfunction occurs.
DC IN jack
Battery
DC plug
1 Slide the battery release lever and remove the battery terminal cover.
Battey release lever
2 Attach the battery pack by sliding it in the direction of the arrow until it clicks.
started Getting
Mains lead | 3 With the b mark on the DC plug |
| facing the jack cover, connect the AC |
AC Adaptor | Adaptor to the DC IN jack on your |
To the wall socket | camcorder. |
| b mark |
4 Connect the mains lead to the AC Adaptor.
5 Connect the mains lead to the wall socket.
,continued
Getting started 13