3 Start recording while checking the subject on the LCD screen.

The date and time is not set up in the default setting. To set the date and time, see page 18.

a Remove the lens cap.

b Press OPEN and open the LCD panel.

c While pressing the green button, slide the POWER switch down to light up the CAMERA-TAPE lamp.

The power turns on.

d Press START/STOP.

Recording starts. To change to standby mode, press START/STOP again.

4 View the recorded picture on the LCD screen.

aSlide the POWER switch repeatedly

until the PLAY/EDIT lamp lights up.

b Touch (rewind).

c Touch (play) to start the playback.

To stop, press .

To turn off the power, slide the

POWER switch up to (CHG)

OFF.

Guide Start Quick

Quick Start Guide 9