Inserting a “Memory Stick”

For details on the “Memory Stick” (such as write-protection), see page 117.

bNote

•When using the half-sized “Memory Stick,” the “Memory Stick Duo,” make sure you attach the Memory Stick Duo adaptor. Your camcorder may malfunction when it is inserted without an adaptor (p. 118).

Access lamp

b mark

Insert the “Memory Stick” with the b mark at the bottom left corner until it clicks.

To eject a “Memory Stick”

Lightly push the “Memory Stick” in once.

Lightly push in once.

bNotes

•If you force the “Memory Stick” into the “Memory Stick” slot in the wrong direction, the “Memory Stick” slot may be damaged.

•Do not insert anything other than a “Memory Stick” into the “Memory Stick” slot. Doing so may cause a malfunction of your camcorder.

•When the access lamp is lit or flashing, your camcorder is reading/writing data from/to the “Memory Stick.” Do not shake or knock your camcorder, turn the power off, eject the “Memory

Stick,” or remove the battery pack. Otherwise, image data may be damaged.

started Getting

Getting started 21