Sony DMP-1000 manual Various, To check the actual print image

Re-selecting the image

Move the white frame to the image you want to cancel the selection for and press ENTER. The blue frame disappears and the selection is canceled.

If you want to re-select the image after displaying the actual print image, press PICTURE to return to the thumbnail screen, then repeat step 2.

Re-selecting the type of the split

Press PICTURE so that the thumbnail screen appears. Re-select the split type using the print mode dial. You can use the selected images, or change the selection.

Canceling the operation

Press CLEAR ALL. The selected image is removed and the printer returns to stand by mode.

Perform printing procedures from the beginning.

Note

If you press PRINT when the actual print image is displayed, only the displayed image is printed.

•When selecting the different images for each split plane:

1 Press the arrow button to move the white frame to the image you want to print, then press ENTER. (The blue frame appears inside the white frame.)

2Repeat step 1 to select images for the split planes in the desired order.

The pictures are placed from the upper left to the lower right on the sheet in order of the selection, not in order of the image list.

You can also select an image from the different pages.

	If you select more images than the number of	Making
	the split planes, the images are automatically
	placed on the next print.	Various
Press CAPTURE.
To check the actual print image		Prints
The actual print image appears in the center of the
screen.
To display multiple split prints, press V or v.

When you select 4-	When you select 4-
split printing using a	split printing using
same image	different images

3 Press PRINT.

The print indicator flashes while printing, and the selected image is printed.

Making Various Prints 29GB