Sony DMP-1000 14GB, Loading the print cartridge To replace the print cartridge, Print cartridge

14GB

Loading the print cartridge (continued)

To replace the print cartridge

If the ribbon indicator flashes and the inserted paper emerges after you insert the paper and the paper is automatically loaded, remove the print paper and replace the print cartridge.

Open the cartridge compartment lid and push up the eject lever. Remove the used print cartridge and replace it with a new one.

Eject lever

	Paper supply indicator	Push up the eject lever,
	Ribbon error indicator	then remove the used
		print cartridge.
	To load the half-used ink ribbon cartridge
		While pressing the
		center of the reel, wind
		the ink ribbon in the
		direction of the arrow.
	Wind the ribbon
	until the black
	line comes to the
	left edge.
Notes on storing the	If ink ribbon should tear
	Repair the ribbon with transparent tape. There should
print cartridge
• Avoid placing the	be no problem with using the remaining portion of the
cartridge in a location	ribbon. Before loading the ink ribbon cartridge into the
subject to:	printer, turn the reel until the transparent tape can no
– high temperatures	longer be seen.
– high humidity
– excessive dust
– direct sunlight		Repair with
• When you are going to		transparent tape.
store a partially-used
cartridge for an
extended period of
time, store it in its
original bag.
Setting Up