AUDIO CONTROL [Audio]: Settings related to audio | Description of settings |
control |
|
|
|
INT AUDIO SG [>Audio SG]: Select the operation of the | SILENCE [>> silence]: Silent signal |
internal audio test signal generator. | *1kHz SINE [>> 1kHz]: |
| When you select SG as the audio input in the INPUT SELECT |
| section on the front panel, the audio test signal generated by |
| the internal audio test signal generator is input. |
|
|
OUTPUT CH3/4 [>OUT ch3/4]: Select the signals to be output | *LINE OUT [>> line out]: Output the audio |
from the AUDIO OUT | audio |
connectors. | AUDIO OUT |
| MONITOR OUT [>> monitor]: Output the monitor audio L- |
| channel |
| signals from the AUDIO OUT |
| 4 connectors, respectively. |
|
|
OUTPUT PHASE [>Out phase]: Select the audio playback | AUDIO OUTPUT PHASE: 0 to FF (Select in this range.) |
signal output timing. | The reference position corresponds to a setting of 80H. When |
| a value smaller than 80H is selected, the output timing is |
| advanced, and when a value larger than 80H is selected, the |
| output timing is delayed. (80H = 128 samples = approx. 2.7 |
| ms, 1 sample = approx. 20 µs) |
| Factory default setting: 80H |
|
|
JOG CONTROL [> Jog ctrl]: Select whether to adjust the | OFF [>> OFF]: Do not adjust the audio playback speed. |
audio playback speed during slow playback. | *ON [>> ON]: Adjust the audio playback speed. |
|
|
SHUTTLE MUTE [>Shutl mute]: Set the audio muting | *OFF [>> OFF]: Not muted. |
conditions during shuttle playback. | CUEUP or PREROLL [>> CUEUP]: Muted during |
| preroll operations. |
| FULL [>> FULL]: Muted in shuttle mode. |
|
|
AUDIO EDIT [>Audio edit]: Specify the type of editing for | CUT EDIT [>> Cut edit]: Cut editing (Discontinuity in audio |
audio signals. | signal may result at the editing point, causing noise during |
| playback.) |
| *CROSS FADE [>> Cross]: |
| IN/OUT |
FADE IN/OUT [>> Fade]: Fade in and fade out
IN OUT
DV PB ATT [>DV PB ATT]: When playing back a tape | OFF [>> OFF]: Do not attenuate. |
recorded in consumer DV format, select whether to | *ON [>> ON]: Attenuate. |
attenuate the audio output level. |
|
|
|
|
|
DIGITAL PROCESS [Digi. proc]: Settings related to digital | Description of settings |
process |
|
|
|
SYSTEM EE MODE [>System EE]: Select the bypass | *OFF [>> OFF]: Bypass |
mode or system | ON [>> ON]: System |
|
|
Settings Menu 4 Chapter
Menu Contents 65