a DV IN/OUT connector (6-pin IEEE-1394) (optional DSBK-1803 i.LINK/DV Input/Output Board required)

This i.LINK-compatible connector (subsequently referred to also as the i.DV IN/OUT connector) inputs and outputs digital video and audio signals in DV format.

Note

When searching at speeds in the range +1/2 to +1/30 or

−1/2 to − 1/30 times normal speed, the audio signal output from this connector and monitored on external equipment may sound differently from the audio signal played back on this unit.

bSDTI (QSDI) (Serial Data Transport Interface (QSDI)) IN/OUT connectors (BNC type) (optional DSBK-1802 SDTI (QSDI) Input/Output Board required)

The IN connector inputs and the OUT connector outputs digital video and audio signals in SDTI (QSDI) format.

Note

When searching at speeds in the range +1/2 to +1/30 or

−1/2 to − 1/30 times normal speed, the audio signal output from this connector and monitored on external equipment may sound differently from the audio signal played back on this unit.

cSDI (Serial Digital Interface) IN (input) and active through output connectors (BNC type) (optional DSBK-1801 SDI/AES/EBU Input/Output Board required)

Input digital video and audio signals in SDI format to the left-hand connector. The right-hand connector is for an active-through connection.

dSDI (Serial Digital Interface) OUT connectors

(BNC type) (optional DSBK-1801 SDI/AES/EBU Input/Output Board required)

Output SDI-format digital video and audio signals. The same signals are output from both connectors.

eDIGITAL AUDIO (AES/EBU) IN connectors (BNC type) (optional DSBK-1801 SDI/AES/EBU Input/Output Board required)

Input digital audio signals in AES/EBU format to these connectors.

The left-hand connector (CH-1/2) is for audio channels 1 and 2, and the right-hand connector (CH-3/4) is for audio channels 3 and 4.

fDIGITAL AUDIO (AES/EBU) OUT connectors (BNC type) (optional DSBK-1801 SDI/AES/EBU Input/Output Board required)

These connectors output digital audio signals in AES/EBU format.

The left-hand connector (CH-1/2) is for audio channels 1 and 2, and the right-hand connector (CH-3/4) is for audio channels 3 and 4.

Overview 1 Chapter

CAnalog audio signal input/output section

 

a AUDIO IN LEVEL/600 Ω switches

 

 

c AUDIO OUT CH-1 to CH-4 connectors

AUDIO IN LOW LEVEL

HIGH

LOW LEVEL

HIGH

LOW LEVEL

HIGH

LOW LEVEL

HIGH

AUDIO OUT

 

 

MONITOR OUT

OFF

ON

OFF

ON

OFF

ON

OFF

ON

 

 

 

 

 

600Ω

 

600Ω

 

600Ω

 

600Ω

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO

CH-1

CH-2

CH-3

CH-4

 

CH-1

CH-2

CH-3

CH-4

 

b AUDIO IN CH-1 to CH-4 connectors

 

 

d AUDIO MONITOR OUT connector

aAUDIO IN LEVEL/600 Ω switches

Set these switches for each channel as shown in the following table, according to the audio input levels to the AUDIO IN CH-1 to CH-4 connectors and the required impedance.

Location and Function of Parts

19