Error Messages
This unit is provided with a
Note
To display error messages on the monitor screen, connect the monitor to the VIDEO OUT 2 (SUPER) connector, and set the CHARA. DISPLAY menu item (see page 59) to ON (factory default setting).
ERROR |
|
| ||||
AN ERROR HAS BEEN | Error message |
| ||||
|
|
|
|
| ||
DETECTED. INFORM SERVICE |
| |||||
|
| |||||
OF FOLLOWING CODE: |
|
| ||||
|
|
| Error code |
| ||
|
|
|
| |||
PRESS EJECT KEY | Direction |
| ||||
|
|
|
| Error code | ||
TO EJECT TAPE. | ||||||
|
|
| |
|
|
|
Monitor screen | Time counter display |
If an error message appears, follow the direction indicated on the monitor screen.
Alarm Messages
When operating this unit, the unit may sometimes output alarm messages such as the one shown below to the monitor screen and the time counter display.
Troubleshooting and Maintenance 6 Chapter
ALARM
Cause of
REMOTE MODE IS SELECTED alarm
PRESS REMOTE BUTTON Direction
TURNING IT OFF
REMOTE!
Monitor screen | Time counter display |
If such an alarm message appears, a connection or operation error may have been made, or condensation on heads may have occurred. Follow the direction indicated on the monitor screen.
Note
To display alarm messages on the monitor screen, it is necessary for the monitor to be connected to the VIDEO OUT 2 (SUPER) connector, and set the following menu items to ON.
•CHARA. DISPLAY (see page 59)
•ALARM (see page 60)
•REF ALARM (see page 60)
96 Troubleshooting